Description
Alltech dosing stations stand out with their compact design. Dosing stations are pre-assembled, including wiring and piping, and tested at Alltech’s work in Weingarten. They are mounted on the wall, on the floor, or in a protective box. The chemical-resistant protection box ensures high safety for operators and the environment, regardless of whether the dosing station is located indoors or outdoors.
Application examples:
Dosage of accumulation agents is used to remove suspended solids.
Dosing stations are equipped with powerful and proven FKM diaphragm piston pumps. The required dose output is selectable and complies with process requirements.
Dose capacity is controlled by one or two external 4-20mA signals or via PROCON V3 programmable dose output control system.
Advantage:
Alltech particular importance is attached to the long product life cycle as well as the ability to replace individual system components as needed.
Dose units of acid and caustic for neutralization
For acid and caustic dosing stations, the required dose capacity is selected according to the requirements of the specific process.
Control output capacity by
Frequency adjustment via 0 / 4-20mA
Adjustment via pulse length by proportional controller TRIGGOMAT C2
Dose units for phosphate removal
Dose stations with FKM powerful piston-diaphragm measuring pump installed in PE protective enclosure for outdoor installation, with the static calculation of wind and snow loads. Equipped with automatic lighting, ventilation, heating, and suction. This makes system operation very convenient. In addition, not only the dosing line, including the vacuum control and pump but also the operating personnel are well protected against the effects of the weather. The automatic suction device facilitates easy operation. The long-term vacuum pump is also included in the protective box.
Optimal chemical consumption with PROCON dose control system
Using PROCON can reduce the use of chemicals even without measuring phosphate online. Dose output control system is designed for optimal control of dose pumps through an external analog signal or using a trend line. The core of PROCON is an easy-to-use touch screen.
