Vertical pyrolysis centrifuges are a suitable technological solution to complete the separation process performed by receiver centrifuges. Centrifugal separators, with very high rotational speeds, can reach a centrifugal force of up to 10,000 grams. This very high centrifugal force is a key element that allows the separators to remove solid particles that have not been successfully trapped in previous separation steps. In addition, the achievable performance levels depend on many factors: structural (type and design of the disc, internal volume, surfaces and discharge devices) and operational (flow rate, product characteristics, amount and type of solid content, temperature).
The product enters the upper part of the separator through the feed tube for clarification and is then subjected to centrifugal force and is forced to pass through hundreds of internal disks. The combined operation of the centrifugal force combined with the internal disks leads to the separation of solid particles that deposit on the drum wall and are then automatically and intermittently discharged. Fluids rise to the top of the drum and are continuously discharged through free outlets or centrifugal pumps.
The VXGR Vortex system consists of a group of adjustable mixed blades that rotate and create a vortex that causes the sand to settle (even very fine grains, up to 100 microns). Sedimented sand is extracted by a pneumatic (air lift) or by a sand pump located outside the hopper. It should be noted that this device also has the ability to separate oil from grease. In general, this equipment introduces a concrete tank, but it is also possible to request and order a steel tank.
Sign up to get latest update from Dahi Bondad Tejarat
Copyright 2022 DohiBondad All Rights Reserved.
